Rendered at 23:15:38 GMT+0000 (Coordinated Universal Time) with Cloudflare Workers.
dylan604 1 days ago [-]
"Ease of carrying the telescope with bag straps"
I like this, but...
Some of the best telescope buying advice I was ever given was to only buy a scope as big as you can carry/setup by yourself. It's hard to find time in one's schedule to take a scope somewhere, but it can be next to impossible to align schedules with another person. At least for a scope meant to take somewhere. Most people don't have a permanent setup though, so it's a pretty decent thing to consider.
The weight is only part of the equation, but also consider if it takes more than two hands to assemble.
big_Brain69 8 hours ago [-]
Definitely agreed. So we realised this later, we were initially of the opinion to operate it from our lab but later did we get the idea to have bag straps to atleast make it a little bit more portable. Right now, we have been able to carry the entire setup individually, definitely a cumbersome task but people around us have been helpful.
But as you rightly said to buy a scope as big as you can carry by yourself, this is something we would work on it in the near future.
Wallace is built, but Gromit, a 16.5” F/3, is under progress. Working on the mirror and CAD :)
shamaz65 2 days ago [-]
I have no idea that it is possible to 3D print telescopes. Is this less expensive?
BadJo0Jo0 1 days ago [-]
The question probably shouldn't be "is it less expensive" but "is it a better value".
The general sentiment behind these 3d printed telescopes are that you'd generally get better quality and potentially better QoL features at the same cost of buying some commercially available options.
From the Hadley project
>The mission here is to make an attractive alternative to the shoddy, hard to use "hobby-killer" scopes in the $100-200 range.
muyuu 1 days ago [-]
Yep, my experience is that cheaper scopes are so shoddy I've regretted giving them away.
labcomputer 1 days ago [-]
It’s not really the telescope you’re printing, but some custom fittings to assemble metal rods into a telescope.
People have been making telescopes with this method before 3D printing existed. They just used something else for all the little dodads.
Where would one go to learn about/find resources on the types of 3d printers best used for a telescope project like this?
big_Brain69 7 hours ago [-]
3D printing does help a lot, you can probably scour the internet especially around printables and all but my biased opinion would be to get your hands dirty with wood as much as possible. You get to learn a lot!
Apparently a 6" primary one. There's also a secondary one as well. /s
CubicalOrange 17 hours ago [-]
really good budget build! I love the photos!
What's the next upgrade?
big_Brain69 7 hours ago [-]
Well well well,
So we have added a red dot finder to which we have adjusted our mirrors, identifying objects in the night sky is now wayyyy easier.
The next thing in the list would be to get solar filters and observe sun.
Zardoz84 2 days ago [-]
I need to build a Dobson mount for my old homemade 8" F 5.5 Newton ... Why doesnt have a mount ? Well, it had 2 mounts in the past. It was built by my father, and we moved to another house, we need to ditch the mount. I managed to save the tube and the parts, and lately built an adapter to be attached to an EQ6 mount that I was allowed to use with a university astronomical association.
I like this, but...
Some of the best telescope buying advice I was ever given was to only buy a scope as big as you can carry/setup by yourself. It's hard to find time in one's schedule to take a scope somewhere, but it can be next to impossible to align schedules with another person. At least for a scope meant to take somewhere. Most people don't have a permanent setup though, so it's a pretty decent thing to consider.
The weight is only part of the equation, but also consider if it takes more than two hands to assemble.
https://www.printables.com/model/1325533-smallest-telescope-...
Wallace, my 6” f/2.8 :
https://www.printables.com/model/997327-wallace-6-f28-telesc...
And my tiny but mighty 3” f/4 : https://www.printables.com/model/1475113-76300-pocket-dobson
Wallace is built, but Gromit, a 16.5” F/3, is under progress. Working on the mirror and CAD :)
The general sentiment behind these 3d printed telescopes are that you'd generally get better quality and potentially better QoL features at the same cost of buying some commercially available options.
From the Hadley project
>The mission here is to make an attractive alternative to the shoddy, hard to use "hobby-killer" scopes in the $100-200 range.
People have been making telescopes with this method before 3D printing existed. They just used something else for all the little dodads.
What's the next upgrade?
So we have added a red dot finder to which we have adjusted our mirrors, identifying objects in the night sky is now wayyyy easier. The next thing in the list would be to get solar filters and observe sun.